ClicOn No Holes Dash Mount for Nissan 350 Z 03-09

Out-of-Stock: Normal lead time: 2 weeks

$48.99 (Incl. GST) ACC-DM 653250
 

ClicOn Centre Mount for Nissan 350 Z 03-09

This Dashmount has been custom designed to fit your vehicle's dashboard without damaging your interior. Designed for mounting ClicOn holders. ONE Part of a TWO Part Solution. Installation instructions provided.

Fits:

Nissan 350 Z 03-06




This ClicOn Dash Mount allows the user to connect their cradle their dashboard without the needs for drilling holes. They are car specific. They can be used with the full range of Strike Alpha Car Cradles & Holders see http://www.strike.com.au/products/Strike-Alpha-Car-Cradles

Attention! Please read all of the instructions and look at the pictures before attaching the ClicOn.

  • 1. Press the thin end of the enclosed gap opener into the gap between the center console panel and the console sidewall, to widen the gap.

  • 2. Peel off the cover of the adhesive tape on the ClicOn. Press the angled edge on the left side of the ClicOn into the gap between the stereo and the console panel.

  • 3. Press forward with your thumb so the angled edge on the right side of the ClicOn snaps into the gap above the gap opener. Place your fingers on the side of the ClicOn and push towards the console sidewall to make sure the angled edge goes all the way into the gap. Pull out the gap opener.

  • 4. The ClicOn is in place.

Attention! Please read all of the instructions and look at the pictures before attaching the ClicOn.

  • 1. Press the thin end of the enclosed gap opener into the gap between the center console panel and the console sidewall, to widen the gap.

  • 2. Peel off the cover of the adhesive tape on the ClicOn. Press the angled edge on the left side of the ClicOn into the gap between the stereo and the console panel.

  • 3. Press forward with your thumb so the angled edge on the right side of the ClicOn snaps into the gap above the gap opener. Place your fingers on the side of the ClicOn and push towards the console sidewall to make sure the angled edge goes all the way into the gap. Pull out the gap opener.

  • 4. The ClicOn is in place.
Contains 1 x vehicle specific dash mount