ClicOn No Holes Dash Mount for Honda Accord 03-07

Out-of-Stock: Normal lead time: 2 weeks

$48.99 (Incl. GST) ACC-DM 653228
 

ClicOn Angled Mount for Honda Accord 03-07

This Dashmount has been custom designed to fit your vehicle's dashboard without damaging your interior. Designed for mounting ClicOn holders. ONE Part of a TWO Part Solution. Installation instructions provided.

Fits:

Honda Accord 03-07




This ClicOn Dash Mount allows the user to connect their cradle their dashboard without the needs for drilling holes. They are car specific. They can be used with the full range of Strike Alpha Car Cradles & Holders see http://www.strike.com.au/products/Strike-Alpha-Car-Cradles

Attention! Please read all of the instructions and look at the pictures before attaching the ClicOn.

  • 1. Unscrew the screw in the displayed part of the center console sidewall by turning the screw a few turns counter clock wise and pull the screw and its socket out. Remove the sidewall part.

  • 2. Peel off the cover of adhesive tape on the ClicOn. Place the angled edge on the right side of the ClicOn over the console edge so it is aligned towards the hole in the sidewall edge.

  • 3. Press firmly forward on the left side of the ClicOn face plate and at the same time: hook/press the angled edge on the left side of the ClicOn into the hole in the sidewall edge. Put the loosened part of the console side wall back into place.

  • 4. The ClicOn is in place.

Attention! Please read all of the instructions and look at the pictures before attaching the ClicOn.

  • 1. Unscrew the screw in the displayed part of the center console sidewall by turning the screw a few turns counter clock wise and pull the screw and its socket out. Remove the sidewall part.

  • 2. Peel off the cover of adhesive tape on the ClicOn. Place the angled edge on the right side of the ClicOn over the console edge so it is aligned towards the hole in the sidewall edge.

  • 3. Press firmly forward on the left side of the ClicOn face plate and at the same time: hook/press the angled edge on the left side of the ClicOn into the hole in the sidewall edge. Put the loosened part of the console side wall back into place.

  • 4. The ClicOn is in place.
Contains 1 x vehicle specific dash mount