ClicOn No Holes Dash Mount for Volvo XC90 02-14

Out-of-Stock: Normal lead time: 2 weeks

$48.99 (Incl. GST) ACC-DM 653172
 

ClicOn Angled Mount for Volvo XC90 02-14

This Dashmount has been custom designed to fit your vehicle's dashboard without damaging your interior. Designed for mounting ClicOn holders. ONE Part of a TWO Part Solution. Installation instructions provided.

Fits:

Volvo XC90 02-14




This ClicOn Dash Mount allows the user to connect their cradle their dashboard without the needs for drilling holes. They are car specific. They can be used with the full range of Strike Alpha Car Cradles & Holders see http://www.strike.com.au/products/Strike-Alpha-Car-Cradles

Attention! Read all instructions and look at the pictures before attaching the ClicOn.
This ClicOn consists of two parts.
Part 1: Attaching part (the smallest part)
Part 2. ClicOn face plate

  • 1. Peel off the cover of the adhesive tape on Part 1. Place Part 1 in the same position as in the picture, in the same hight. Press the angled edge of Part 1 into the gap between the dashboard and the dashboard.

  • 2. Press to the left on Part 1, away from the steering wheel, so the angled edge hooks behind the control panel and the adhesive attaches to the dashboard.

  • 3. Open up the predrilled holes in Part 2 with a screwdriver (Philips). Peel off the cover of the adhesive tape on Part 2. Place Part 2 onto Part 1 so the holes match and the adhesive is to the right. Screw Part 2 onto Part 1 with the enclosed screws. NOTE: Screw straight into Part 1, in the same angle as Part 1.

  • 4. The ClicOn is in place.

Attention! Read all instructions and look at the pictures before attaching the ClicOn.
This ClicOn consists of two parts.
Part 1: Attaching part (the smallest part)
Part 2. ClicOn face plate

  • 1. Peel off the cover of the adhesive tape on Part 1. Place Part 1 in the same position as in the picture, in the same hight. Press the angled edge of Part 1 into the gap between the dashboard and the dashboard.

  • 2. Press to the left on Part 1, away from the steering wheel, so the angled edge hooks behind the control panel and the adhesive attaches to the dashboard.

  • 3. Open up the predrilled holes in Part 2 with a screwdriver (Philips). Peel off the cover of the adhesive tape on Part 2. Place Part 2 onto Part 1 so the holes match and the adhesive is to the right. Screw Part 2 onto Part 1 with the enclosed screws. NOTE: Screw straight into Part 1, in the same angle as Part 1.

  • 4. The ClicOn is in place.
Contains 1 x vehicle specific dash mount