ClicOn No Holes Dash Mount for Citroen Berlingo II 03-07

Out-of-Stock: Normal lead time: 2 weeks

$48.99 (Incl. GST) ACC-DM 653144
 

ClicOn Angled Mount for Citroen Berlingo II 03-07

This Dashmount has been custom designed to fit your vehicle's dashboard without damaging your interior. Designed for mounting ClicOn holders. ONE Part of a TWO Part Solution. Installation instructions provided.

Fits:

Citroen Berlingo II 03-08
Peugeot Partner 03-08




This ClicOn Dash Mount allows the user to connect their cradle their dashboard without the needs for drilling holes. They are car specific. They can be used with the full range of Strike Alpha Car Cradles & Holders see http://www.strike.com.au/products/Strike-Alpha-Car-Cradles

Attention! Read all instructions and look at the pictures before attaching the ClicOn.

This ClicOn consists of two parts.
Part 1: Attaching part. (The smallest part)
Part 2: ClicOn face plate

  • 1. Press the thin end of the enclosed gap opener into the gap between the control panel and the surrounding the frame to widen the gap. Peel off the cover of the adhesive tape on Part 1. Press the angled edge into the gap above the gap opener.

  • 2. Press Part 1 leftwards, away from the steering wheel, so the angled edge hooks behind the control panel and the adhesive tape attaches to the surrounding frame. Pull out the gap opener.

  • 3. Open up the predrilled holes in Part 2 with a screwdriver (Philips). Peel off the cover of the adhesive tape. Place Part 2 onto Part 1 so the holes match and the adhesive tape is to the right. Screw Part 2 onto Part 1 with the enclosed screws. NOTE! Screw straight into Part 1, in the same angle as Part 1.

  • 4. The ClicOn is in place.

Attention! Read all instructions and look at the pictures before attaching the ClicOn.

This ClicOn consists of two parts.
Part 1: Attaching part. (The smallest part)
Part 2: ClicOn face plate

  • 1. Press the thin end of the enclosed gap opener into the gap between the control panel and the surrounding the frame to widen the gap. Peel off the cover of the adhesive tape on Part 1. Press the angled edge into the gap above the gap opener.

  • 2. Press Part 1 leftwards, away from the steering wheel, so the angled edge hooks behind the control panel and the adhesive tape attaches to the surrounding frame. Pull out the gap opener.

  • 3. Open up the predrilled holes in Part 2 with a screwdriver (Philips). Peel off the cover of the adhesive tape. Place Part 2 onto Part 1 so the holes match and the adhesive tape is to the right. Screw Part 2 onto Part 1 with the enclosed screws. NOTE! Screw straight into Part 1, in the same angle as Part 1.

  • 4. The ClicOn is in place.
Contains 1 x vehicle specific dash mount