ClicOn No Holes Dash Mount for Mitsubishi Getz 02-05

Out-of-Stock: Normal lead time: 2 weeks

$48.99 (Incl. GST) ACC-DM 653140
 

ClicOn Angled Mount for Mitsubishi Getz 02-05

This Dashmount has been custom designed to fit your vehicle's dashboard without damaging your interior. Designed for mounting ClicOn holders. ONE Part of a TWO Part Solution. Installation instructions provided.

Fits:

Hyundai Getz 02-05




This ClicOn Dash Mount allows the user to connect their cradle their dashboard without the needs for drilling holes. They are car specific. They can be used with the full range of Strike Alpha Car Cradles & Holders see http://www.strike.com.au/products/Strike-Alpha-Car-Cradles

Attention! Read all instructions and look at the pictures before attaching the ClicOn.

This ClicOn consists of two parts.
Part 1. Attaching part (the smallest part)
Part 2. ClicOn face plate

  • 1. Press the thin ends of the enclosed gap openers into the gap between the frame surrounding the controlpanel and the dashboard to widen the gap. Place the gap openers approx. 10 cm apart, one aligned with the upper part of the stereo and one aligned with the lower part of the stereo. Peel off the adhesive tape cover on Part 1. Press the angled edge of Part 1 into the gap between the gap openers.

  • 2. Press Part 1 leftwards, away from the steering wheel, so the angled edge hooks behind the control panel frame and the adhesive tape attaches. Pull out the gap openers.

  • 3. Open up the predrilled holes in Part 2 with a screwdriver (Philips). Peel off the adhesive tape cover on Part 2. Place Part 2 onto Part 1 so the holes match. Screw Part 2 onto Part 1 with the enclosed screw. NOTE! Screw the screws straight into Part 1, in the same angle as Part 1.

  • 4. The ClicOn is in place.

Attention! Read all instructions and look at the pictures before attaching the ClicOn.

This ClicOn consists of two parts.
Part 1. Attaching part (the smallest part)
Part 2. ClicOn face plate

  • 1. Press the thin ends of the enclosed gap openers into the gap between the frame surrounding the controlpanel and the dashboard to widen the gap. Place the gap openers approx. 10 cm apart, one aligned with the upper part of the stereo and one aligned with the lower part of the stereo. Peel off the adhesive tape cover on Part 1. Press the angled edge of Part 1 into the gap between the gap openers.

  • 2. Press Part 1 leftwards, away from the steering wheel, so the angled edge hooks behind the control panel frame and the adhesive tape attaches. Pull out the gap openers.

  • 3. Open up the predrilled holes in Part 2 with a screwdriver (Philips). Peel off the adhesive tape cover on Part 2. Place Part 2 onto Part 1 so the holes match. Screw Part 2 onto Part 1 with the enclosed screw. NOTE! Screw the screws straight into Part 1, in the same angle as Part 1.

  • 4. The ClicOn is in place.
Contains 1 x vehicle specific dash mount