ClicOn No Holes Dash Mount for Subaru Forester 03-07

Out-of-Stock: Normal lead time: 2 weeks

$48.99 (Incl. GST) ACC-DM 653119
 

ClicOn Angled Mount for Subaru Forester 03-07

This Dashmount has been custom designed to fit your vehicle's dashboard without damaging your interior. Designed for mounting ClicOn holders. ONE Part of a TWO Part Solution. Installation instructions provided.

Fits:

Subaru Forester 03-07




This ClicOn Dash Mount allows the user to connect their cradle their dashboard without the needs for drilling holes. They are car specific. They can be used with the full range of Strike Alpha Car Cradles & Holders see http://www.strike.com.au/products/Strike-Alpha-Car-Cradles

Please note this ClicOn Mount is not Ideal for Subaru Foresters with the in-dash retractable cup holder (XS Lux pack and XT). Please select another one suitable for your car if you have the cup holder in your dash.

Attention! Read all of the instuctions and look at the pictures before attaching the ClicOn.

This ClicOn is divided into two parts, which will be referred to as Part 1, and Part 2:
Part 1: The attaching part (the smallest part)
Part 2: The ClicOn faceplate

  • 1. Press the thin end of the enclosed gap opener into the gap between the center console panel and the console edge, to widen it. Peel off the cover of the adhesive tape on Part 1 and place the thin angled edge into the gap below the gap opener.

  • 2. Press the angled edge firmly into the gap and at the same time: bend Part 1 to the left until you hear/feel it snaps into place and the adhesive tape attaches to the console edge.

  • 3. Press a screwdriver (Philips) firmly through the holes in Part 2 to open them up. Peel off the cover of the adhesive tape on Part 2. Place Part 2 onto Part 1 so the holes match, and the adhesive tape on Part 2 is on the right side attaching to the center console panel. Screw Part 2 onto Part 1 using the enclosed screws. Pull out the gap opener.

  • 4. The ClicOn is in place.

Please note this ClicOn Mount is not Ideal for Subaru Foresters with the in-dash retractable cup holder (XS Lux pack and XT). Please select another one suitable for your car if you have the cup holder in your dash.

Attention! Read all of the instuctions and look at the pictures before attaching the ClicOn.

This ClicOn is divided into two parts, which will be referred to as Part 1, and Part 2:
Part 1: The attaching part (the smallest part)
Part 2: The ClicOn faceplate

  • 1. Press the thin end of the enclosed gap opener into the gap between the center console panel and the console edge, to widen it. Peel off the cover of the adhesive tape on Part 1 and place the thin angled edge into the gap below the gap opener.

  • 2. Press the angled edge firmly into the gap and at the same time: bend Part 1 to the left until you hear/feel it snaps into place and the adhesive tape attaches to the console edge.

  • 3. Press a screwdriver (Philips) firmly through the holes in Part 2 to open them up. Peel off the cover of the adhesive tape on Part 2. Place Part 2 onto Part 1 so the holes match, and the adhesive tape on Part 2 is on the right side attaching to the center console panel. Screw Part 2 onto Part 1 using the enclosed screws. Pull out the gap opener.

  • 4. The ClicOn is in place.
Contains 1 x vehicle specific dash mount