ClicOn No Holes Dash Mount for Honda CR-V 02-06

Out-of-Stock: Normal lead time: 2 weeks

$48.99 (Incl. GST) ACC-DM 653058
 

ClicOn Centre Mount for Honda CR-V 02-06 Not the product you are looking for? Go to http://www.strike.com.au/products/dashmounts to start again




This ClicOn Dash Mount allows the user to connect their cradle their dashboard without the needs for drilling holes. They are car specific. They can be used with the full range of Strike Alpha Car Cradles & Holders see http://www.strike.com.au/products/Strike-Alpha-Car-Cradles

Attention! Read all instructions before attaching the ClicOn.

  • 1. Remove the screw below the air vent, in the frame surrounding the air vent. Peel off the adhesive tape cover on the ClicOn.

  • 2. Place/Hook the ClicOn over the air vent panel edge so the hole in the CilcOn matches the hole from the removed screw.

  • 3. Put the screw through the hole in the ClicOn (hold it slightly angled) and into the hole in the panel and screw it all the way in.

  • 4. The ClicOn is in place.



Please Note! Use the existing screw from year model 02-04 and use the attached longer screw when it is a 05- model.

Attention! Read all instructions before attaching the ClicOn.

  • 1. Remove the screw below the air vent, in the frame surrounding the air vent. Peel off the adhesive tape cover on the ClicOn.

  • 2. Place/Hook the ClicOn over the air vent panel edge so the hole in the CilcOn matches the hole from the removed screw.

  • 3. Put the screw through the hole in the ClicOn (hold it slightly angled) and into the hole in the panel and screw it all the way in.

  • 4. The ClicOn is in place.



Please Note! Use the existing screw from year model 02-04 and use the attached longer screw when it is a 05- model.

Contains 1 x vehicle specific dash mount