ClicOn No Holes Dash Mount for Kia Carens 01-02

Out-of-Stock: Normal lead time: 2 weeks

$48.99 (Incl. GST) ACC-DM 652940
 

ClicOn Angled Mount for Kia Carens 01-02

This Dashmount has been custom designed to fit your vehicle's dashboard without damaging your interior. Designed for mounting ClicOn holders. ONE Part of a TWO Part Solution. Installation instructions provided.

Fits:

Kia Carens Year(s):01-02




This ClicOn Dash Mount allows the user to connect their cradle their dashboard without the needs for drilling holes. They are car specific. They can be used with the full range of Strike Alpha Car Cradles & Holders see http://www.strike.com.au/products/Strike-Alpha-Car-Cradles

Attention! Read all instructions before attaching the ClicOn.

This ClicOn consists of two parts.
Part 1. ClicOn attaching part (the smallest part)
Part 2. ClicOn face plate

  • 1. Press the thin end of the enclosed gap opener into the gap between the dashboard and the frame surrounding the control panel. Peel off the cover of the adhesive tape on Part 1. Press the angled edge of Part 1 into the gap below the gap opener. Press on Part 1, away from the steering wheel, so the angled edge hooks behind the control panel and the adhesive tape attaches. Pull out the gap opener.

  • 2. Open up the predrilled holes in Part 2 with a screwdriver (Philips). Peel off the cover of the adhesive tape on Part 2. Press the long right part into the gap between the control panel and the surrounding frame.

  • 3. Place Part 2 onto Part 1 so the holes match. Screw 2 onto Part 1 using the enclosed screws.

  • 4. The ClicOn is in place.

Attention! Read all instructions before attaching the ClicOn.

This ClicOn consists of two parts.
Part 1. ClicOn attaching part (the smallest part)
Part 2. ClicOn face plate

  • 1. Press the thin end of the enclosed gap opener into the gap between the dashboard and the frame surrounding the control panel. Peel off the cover of the adhesive tape on Part 1. Press the angled edge of Part 1 into the gap below the gap opener. Press on Part 1, away from the steering wheel, so the angled edge hooks behind the control panel and the adhesive tape attaches. Pull out the gap opener.

  • 2. Open up the predrilled holes in Part 2 with a screwdriver (Philips). Peel off the cover of the adhesive tape on Part 2. Press the long right part into the gap between the control panel and the surrounding frame.

  • 3. Place Part 2 onto Part 1 so the holes match. Screw 2 onto Part 1 using the enclosed screws.

  • 4. The ClicOn is in place.
Contains 1 x vehicle specific dash mount