This ClicOn Dash Mount allows the user to connect their cradle their dashboard without the needs for drilling holes. They are car specific. They can be used with the full range of Strike Alpha Car Cradles & Holders see http://www.strike.com.au/products/Strike-Alpha-Car-Cradles
Attention! Read all instructions before attaching the ClicOn mount.
This ClicOn consists of two parts.
Part 1. Attaching piece.
Part 2. ClicOn face plate.
- 1. Press the thin end of the enclosed gap opener into the gap between the control panel and the dashboard to widen the gap. Peel off the cover of the adhesive tape on Part 1. Press Part 1 into the gap above the gap opener.
- 2. Press on Part 1, away from the steering wheel, so the angled edge hooks under/behind the control panel.
- 3. Press a screwdriver througt the predrilled holes i Part 2 to open them up. Peel off the cover of the adhesive tape on Part 2. Place Part 2 over Part 1 so the holes match. Screw Part 2 onto Part 1 with the enclosed screws.
- 4. The ClicOn is in place.
Attention! Read all instructions before attaching the ClicOn mount.
This ClicOn consists of two parts.
Part 1. Attaching piece.
Part 2. ClicOn face plate.
- 1. Press the thin end of the enclosed gap opener into the gap between the control panel and the dashboard to widen the gap. Peel off the cover of the adhesive tape on Part 1. Press Part 1 into the gap above the gap opener.
- 2. Press on Part 1, away from the steering wheel, so the angled edge hooks under/behind the control panel.
- 3. Press a screwdriver througt the predrilled holes i Part 2 to open them up. Peel off the cover of the adhesive tape on Part 2. Place Part 2 over Part 1 so the holes match. Screw Part 2 onto Part 1 with the enclosed screws.
- 4. The ClicOn is in place.
Contains 1 x vehicle specific dash mount
