ClicOn No Holes Dash Mount for Citroen Xsara 01-06

Out-of-Stock: Normal lead time: 2 weeks

$48.99 (Incl. GST) ACC-DM 652868
 

ClicOn Angled Mount for Citroen Xsara 01-06

This Dashmount has been custom designed to fit your vehicle's dashboard without damaging your interior. Designed for mounting ClicOn holders. ONE Part of a TWO Part Solution. Installation instructions provided.

Fits:

Citroen Xsara 01-04




This ClicOn Dash Mount allows the user to connect their cradle their dashboard without the needs for drilling holes. They are car specific. They can be used with the full range of Strike Alpha Car Cradles & Holders see http://www.strike.com.au/products/Strike-Alpha-Car-Cradles

Attention! Read all instructions before attaching the ClicOn.
There are two parts:
Part 1. Attaching piece.
Part 2. ClicOn face plate.

  • 1. Remove the frame surrounding the stereo.

  • 2. Loosen the two screws that are the furthest in in the control panel.

  • 3. Press the thin end of the enclosed gap opener into the gap between the dashboard and the frame surrounding the control panel to widen the gap. Peel off the cover of the adhesive on Part 1. Press Part 1 into the gap above the gap opener, next to the stereo. Slide Part 1 downwards in the gap. Press to the left on Part 1, away from the steering wheel, so the angled edge hooks behind/under the panel frame and the adhesive tape sticks.

  • 4. Press a Philips screwdriver through the predrilled holes in Part 2. Peel off the cover of the adhesive. Place Part 2 onto Part 1 so the holes match. Screw Part 2 onto Part 1 using the enclosed screws. Pull out the gap opener. Tighten the screws. Put back the frame. The ClicOn is in place.

Attention! Read all instructions before attaching the ClicOn.
There are two parts:
Part 1. Attaching piece.
Part 2. ClicOn face plate.

  • 1. Remove the frame surrounding the stereo.

  • 2. Loosen the two screws that are the furthest in in the control panel.

  • 3. Press the thin end of the enclosed gap opener into the gap between the dashboard and the frame surrounding the control panel to widen the gap. Peel off the cover of the adhesive on Part 1. Press Part 1 into the gap above the gap opener, next to the stereo. Slide Part 1 downwards in the gap. Press to the left on Part 1, away from the steering wheel, so the angled edge hooks behind/under the panel frame and the adhesive tape sticks.

  • 4. Press a Philips screwdriver through the predrilled holes in Part 2. Peel off the cover of the adhesive. Place Part 2 onto Part 1 so the holes match. Screw Part 2 onto Part 1 using the enclosed screws. Pull out the gap opener. Tighten the screws. Put back the frame. The ClicOn is in place.
Contains 1 x vehicle specific dash mount