ClicOn No Holes Dash Mount for Audi A3 S3 01-02

Out-of-Stock: Normal lead time: 2 weeks

$48.99 (Incl. GST) ACC-DM 652857
 

ClicOn Angled Mount for Audi A3 S3 01-02

This Dashmount has been custom designed to fit your vehicle's dashboard without damaging your interior. Designed for mounting ClicOn holders. ONE Part of a TWO Part Solution. Installation instructions provided.

Fits:

Audi A3 00-02
Audi A3 01-03
Audi S3 00-02
Audi S3 01-03




This ClicOn Dash Mount allows the user to connect their cradle their dashboard without the needs for drilling holes. They are car specific. They can be used with the full range of Strike Alpha Car Cradles & Holders see http://www.strike.com.au/products/Strike-Alpha-Car-Cradles

Attention! Read all instructions before attaching the ClicOn.
This ClicOn consists of two parts.


Part 1. Attaching piece.
Part 2. ClicOn face plate.

  • 1. Press the thin end of the enclosed gap opener into the gap between the control panel and the dashboard to widen the gap. Peel off the cover of the adhesive tape on Part 1. Press Part 1 into the gap between the control panel and the dashboard.

  • 2. Press on Part 1, away from the steering wheel, so the edge hooks under/behind the panel.

  • 3. Press a Philips screwdriver through the predrilled holes in part 2 to open them up. Peel off the cover of the adhesive tape on Part 2. Place Part 2 on Part 1 so the holes match up. Screw Part 2 onto Part 1 with the enclosed screws.

  • 4. The ClicOn is in place.

Attention! Read all instructions before attaching the ClicOn.
This ClicOn consists of two parts.


Part 1. Attaching piece.
Part 2. ClicOn face plate.

  • 1. Press the thin end of the enclosed gap opener into the gap between the control panel and the dashboard to widen the gap. Peel off the cover of the adhesive tape on Part 1. Press Part 1 into the gap between the control panel and the dashboard.

  • 2. Press on Part 1, away from the steering wheel, so the edge hooks under/behind the panel.

  • 3. Press a Philips screwdriver through the predrilled holes in part 2 to open them up. Peel off the cover of the adhesive tape on Part 2. Place Part 2 on Part 1 so the holes match up. Screw Part 2 onto Part 1 with the enclosed screws.

  • 4. The ClicOn is in place.
Contains 1 x vehicle specific dash mount