ClicOn No Holes Dash Mount for Toyota Avensis 01-02

Out-of-Stock: Normal lead time: 2 weeks

$48.99 (Incl. GST) ACC-DM 652845
 

ClicOn Angled Mount for Toyota Avensis 01-02

This Dashmount has been custom designed to fit your vehicle's dashboard without damaging your interior. Designed for mounting ClicOn holders. ONE Part of a TWO Part Solution. Installation instructions provided.

Fits:

Toyota Avensis 01-02




This ClicOn Dash Mount allows the user to connect their cradle their dashboard without the needs for drilling holes. They are car specific. They can be used with the full range of Strike Alpha Car Cradles & Holders see http://www.strike.com.au/products/Strike-Alpha-Car-Cradles

Attention! Read all instructions before attaching the ClicOn.


This ClicOn consists of two parts.
Part 1: Attaching piece.
Part 2: ClicOn faceplate.


  • 1. Press the enclosed gap opener into the gap between the dashboard and the frame surrounding the control panel. Peel off the cover of the adhesive tape on Part 1. Press the angled edge of Part 1 into the gap below the gap opener. Push Part 1 away from the steering wheel, so the angled edge of Part 1 hooks under/behind the console frame and the adhesive sticks to the dashboard.

  • 2. Pull out the gap opener. Press on the frame surrounding the control panel so it snaps back into place.

  • 3. Press a screw driver through the predrilled holes on Part 2 to open them up. Peel off the cover of the adhesive tape on Part 2. Place Part 2 onto part 1 so the holes match up. Screw the enclosed holes into the holes in Part 2.

  • 4. The ClicOn is in place.

Attention! Read all instructions before attaching the ClicOn.


This ClicOn consists of two parts.
Part 1: Attaching piece.
Part 2: ClicOn faceplate.


  • 1. Press the enclosed gap opener into the gap between the dashboard and the frame surrounding the control panel. Peel off the cover of the adhesive tape on Part 1. Press the angled edge of Part 1 into the gap below the gap opener. Push Part 1 away from the steering wheel, so the angled edge of Part 1 hooks under/behind the console frame and the adhesive sticks to the dashboard.

  • 2. Pull out the gap opener. Press on the frame surrounding the control panel so it snaps back into place.

  • 3. Press a screw driver through the predrilled holes on Part 2 to open them up. Peel off the cover of the adhesive tape on Part 2. Place Part 2 onto part 1 so the holes match up. Screw the enclosed holes into the holes in Part 2.

  • 4. The ClicOn is in place.
Contains 1 x vehicle specific dash mount