ClicOn No Holes Dash Mount for Toyota RAV 4 01-03

Out-of-Stock: Normal lead time: 2 weeks

$48.99 (Incl. GST) ACC-DM 652841
 

ClicOn Angled Mount for Toyota RAV 4 01-03

This Dashmount has been custom designed to fit your vehicle's dashboard without damaging your interior. Designed for mounting ClicOn holders. ONE Part of a TWO Part Solution. Installation instructions provided.

Fits:

Toyota RAV 4 01-03




This ClicOn Dash Mount allows the user to connect their cradle their dashboard without the needs for drilling holes. They are car specific. They can be used with the full range of Strike Alpha Car Cradles & Holders see http://www.strike.com.au/products/Strike-Alpha-Car-Cradles

Attention! Read all instructions before attaching the ClicOn.


This ClicOn consists of two parts.
Part 1. Attaching piece.
Part 2. ClicOn face plate.

Press the thin end of the enclosed gap opener into the gap between the dashboard and the frame surrounding the center panel. Peel off the cover of the adhesive tape on Part 1.


  • 1. Press the angled right edge on Part 1 into the gap above the gap opener.

  • 2. Push Part 1 away from the steering wheel, so the angled edge hooks under/behind the console frame and the adhesive tape sticks to the dashboard.

  • 3. Press a screwdriver through the predrilled holes in Part 2 to open them up. Peel off the cover of the adhesive tape on Part 2. Place Part 2 over Part 1 so the holes match up. Screw the enclosed screws into the holes on Part 2.

  • 4. The ClicOn is in place.

Attention! Read all instructions before attaching the ClicOn.


This ClicOn consists of two parts.
Part 1. Attaching piece.
Part 2. ClicOn face plate.

Press the thin end of the enclosed gap opener into the gap between the dashboard and the frame surrounding the center panel. Peel off the cover of the adhesive tape on Part 1.


  • 1. Press the angled right edge on Part 1 into the gap above the gap opener.

  • 2. Push Part 1 away from the steering wheel, so the angled edge hooks under/behind the console frame and the adhesive tape sticks to the dashboard.

  • 3. Press a screwdriver through the predrilled holes in Part 2 to open them up. Peel off the cover of the adhesive tape on Part 2. Place Part 2 over Part 1 so the holes match up. Screw the enclosed screws into the holes on Part 2.

  • 4. The ClicOn is in place.
Contains 1 x vehicle specific dash mount