ClicOn No Holes Dash Mount for Volkswagen Bora 98-05

Out-of-Stock: Normal lead time: 2 weeks

$48.99 (Incl. GST) ACC-DM 652808
 

ClicOn Angled Mount for Volkswagen Bora 98-05

This Dashmount has been custom designed to fit your vehicle's dashboard without damaging your interior. Designed for mounting ClicOn holders. ONE Part of a TWO Part Solution. Installation instructions provided.

Fits:

Volkswagen Bora 99-05
Volkswagen Golf IV 98-03
Volkswagen Golf IV Variant 00-04




This ClicOn Dash Mount allows the user to connect their cradle their dashboard without the needs for drilling holes. They are car specific. They can be used with the full range of Strike Alpha Car Cradles & Holders see http://www.strike.com.au/products/Strike-Alpha-Car-Cradles

Please read all of the instructions and look at the pictures before attaching the ClicOn.

This ClicOn consists of two parts:

Part 1. Attaching part (the smallest part)

Part 2. ClicOn face plate

  • 1. Press the thin end of the enclosed gap openers into the gap between the center console panel and the console edge, to widen the gap. Peel off the cover of the adhesive tape on Part 1. Place Part 1 in the same position as in the picture, in the same height. Place the angled edge of Part 1 in the gap between the center console panel frame and the console edge.

  • 2. Press the angled edge firmly into the gap and at the same time: bend Part 1 to the right so the angled edge hooks behind the console edge panel and the adhesive tape attaches to the center console panel.

  • 3. Press a screwdriver (Philips) firmly through the predrilled holes in Part 2 to open them up. Peel off the cover of the adhesive tape on Part 2. Place Part 2 onto Part 1 so the holes match and the adhesive tape on Part 2 is on the left side attaching to the console edge. Screw Part 2 onto Part 1 using the enclosed screws.

  • 4. The ClicOn is in place.

Please read all of the instructions and look at the pictures before attaching the ClicOn.

This ClicOn consists of two parts:

Part 1. Attaching part (the smallest part)

Part 2. ClicOn face plate

  • 1. Press the thin end of the enclosed gap openers into the gap between the center console panel and the console edge, to widen the gap. Peel off the cover of the adhesive tape on Part 1. Place Part 1 in the same position as in the picture, in the same height. Place the angled edge of Part 1 in the gap between the center console panel frame and the console edge.

  • 2. Press the angled edge firmly into the gap and at the same time: bend Part 1 to the right so the angled edge hooks behind the console edge panel and the adhesive tape attaches to the center console panel.

  • 3. Press a screwdriver (Philips) firmly through the predrilled holes in Part 2 to open them up. Peel off the cover of the adhesive tape on Part 2. Place Part 2 onto Part 1 so the holes match and the adhesive tape on Part 2 is on the left side attaching to the console edge. Screw Part 2 onto Part 1 using the enclosed screws.

  • 4. The ClicOn is in place.
Contains 1 x vehicle specific dash mount