ClicOn No Holes Dash Mount for BMW 5 Series M5 E39 96-03

Out-of-Stock: Normal lead time: 2 weeks

$48.99 (Incl. GST) ACC-DM 652806
 

ClicOn Angled Mount for BMW 5 Series M5 E39 96-03

This Dashmount has been custom designed to fit your vehicle's dashboard without damaging your interior. Designed for mounting ClicOn holders. ONE Part of a TWO Part Solution. Installation instructions provided.

Fits:

BMW 5-series M5 E39 96-03




This ClicOn Dash Mount allows the user to connect their cradle their dashboard without the needs for drilling holes. They are car specific. They can be used with the full range of Strike Alpha Car Cradles & Holders see http://www.strike.com.au/products/Strike-Alpha-Car-Cradles

Please read all of the instructions and look at the pictures before attaching the ClicOn.


This ClicOn consists of two parts.
Part 1. Attaching part (the smallest part)
Part 2. ClicOn face plate.

  • 1. Place the grooved edge of Part 1 towards the gap between the climate control panel and the padded console edge.

  • 2. Press Part 1 firmly towards the padded console wall with your right hand and at the same time: press firmly forward on Part 1, towards the climate control panel, so the grooved edge goes into the gap between the climate control panel and the padded console edge. Press until you see or hear/feel it snaps into place. (Note: the gap is very tight so you may have to start pressing on top of Part 1 and then follow through with the lower part of Part 1.)

  • 3. Press a screwdriver (Philips) firmly through the predrilled holes in Part 2 to open them up. Peel off the cover of the adhesive tape on Part 2. Place Part 2 onto Part 1 so the holes match and the adhesive tape on Part 2 is on the right side attaching to the climate control panel. Screw Part 2 onto Part 1 using the enclosed screws.

  • 4. The ClicOn is in place.

Please read all of the instructions and look at the pictures before attaching the ClicOn.


This ClicOn consists of two parts.
Part 1. Attaching part (the smallest part)
Part 2. ClicOn face plate.

  • 1. Place the grooved edge of Part 1 towards the gap between the climate control panel and the padded console edge.

  • 2. Press Part 1 firmly towards the padded console wall with your right hand and at the same time: press firmly forward on Part 1, towards the climate control panel, so the grooved edge goes into the gap between the climate control panel and the padded console edge. Press until you see or hear/feel it snaps into place. (Note: the gap is very tight so you may have to start pressing on top of Part 1 and then follow through with the lower part of Part 1.)

  • 3. Press a screwdriver (Philips) firmly through the predrilled holes in Part 2 to open them up. Peel off the cover of the adhesive tape on Part 2. Place Part 2 onto Part 1 so the holes match and the adhesive tape on Part 2 is on the right side attaching to the climate control panel. Screw Part 2 onto Part 1 using the enclosed screws.

  • 4. The ClicOn is in place.
Contains 1 x vehicle specific dash mount