ClicOn No Holes Dash Mount for Volvo S40 V40 96-00

Out-of-Stock: Normal lead time: 2 weeks

$48.99 (Incl. GST) ACC-DM 652793
 

ClicOn Angled Mount for Volvo S40 V40 96-00

This Dashmount has been custom designed to fit your vehicle's dashboard without damaging your interior. Designed for mounting ClicOn holders. ONE Part of a TWO Part Solution. Installation instructions provided.

Fits:

Volvo S40 96-00
Volvo V40 96-00




This ClicOn Dash Mount allows the user to connect their cradle their dashboard without the needs for drilling holes. They are car specific. They can be used with the full range of Strike Alpha Car Cradles & Holders see http://www.strike.com.au/products/Strike-Alpha-Car-Cradles

Attention: Read all instructions before attaching the ClicOn.
This ClicOn consists of two parts.

Part 1: Attaching piece
Part 2: ClicOn faceplate


Clean the surface with the enclosed alcohol pad.

  • 1. Peel off the cover of the adhesive tape on Part 1 and press the angled edge of Part 1. into the gap between the panel frame surrounding the stereo and the padded console edge.

  • 2. Push forward on the right side of Part 1. towards the padded console edge, so the angled edge of Part 1. hooks under/behind the panel frame and the adhesive sticks to the padded console edge.

  • 3. Peel off the cover of the adhesive tape on Part 2. Adjust Part 2 so the holes match over the holes in Part 1. Use the enclosed screws to screw Part 2 onto Part 1.

  • 4. The ClicOn in place.

Attention: Read all instructions before attaching the ClicOn.
This ClicOn consists of two parts.

Part 1: Attaching piece
Part 2: ClicOn faceplate


Clean the surface with the enclosed alcohol pad.

  • 1. Peel off the cover of the adhesive tape on Part 1 and press the angled edge of Part 1. into the gap between the panel frame surrounding the stereo and the padded console edge.

  • 2. Push forward on the right side of Part 1. towards the padded console edge, so the angled edge of Part 1. hooks under/behind the panel frame and the adhesive sticks to the padded console edge.

  • 3. Peel off the cover of the adhesive tape on Part 2. Adjust Part 2 so the holes match over the holes in Part 1. Use the enclosed screws to screw Part 2 onto Part 1.

  • 4. The ClicOn in place.
Contains 1 x vehicle specific dash mount