ClicOn No Holes Dash Mount for Lexus RX Series 10-14

Out-of-Stock: Normal lead time: 2 weeks

$48.99 (Incl. GST) ACC-DM 634710
 

ClicOn Console Mount for Lexus RX Series 10-14

This Dashmount has been custom designed to fit your vehicle's dashboard without damaging your interior. Designed for mounting ClicOn holders. ONE Part of a TWO Part Solution. Installation instructions provided.

Fits:

Lexus RX Series 10-15




This ClicOn Dash Mount allows the user to connect their cradle their dashboard without the needs for drilling holes. They are car specific. They can be used with the full range of Strike Alpha Car Cradles & Holders see http://www.strike.com.au/products/Strike-Alpha-Car-Cradles
Please read all of the instructions and look at the pictures before attaching the ClicOn.

1. The gap/seam underneath the center console is very tight so you have to move a gap opener along the gap step by step, to widen the gap. Press the thin end of one of the enclosed gap openers into the gap as shown in the picture. Press the second gap opener into the gap next to the first gap opener. Pull out the first gap opener and insert it into the gap next to the second gap opener, and continue doing this until you have one gap opener in the mid area of the console. Pull out the other gap opener. Use the enclosed alcohol pad to clean the area where the ClicOn is to be installed. Peel off the cover of adhesive tape on the ClicOn.

2. Press the gap opener into the gap in the console sidewall and press forward on the thick end of the gap opener to bend the gap wider. Insert the curved edge on the upper part of the ClicOn into the gap next to the gap opener.

3. Support the placement of the upper part of the ClicOn with you fingers and at the same time press forward on the lower part of the ClicOn with your thumb so the angled edge hooks into the gap next to the gap opener. Press until you see or hear/feel it click into place. Pull out the gap openers.

4. The ClicOn is in place.

Please read all of the instructions and look at the pictures before attaching the ClicOn.

1. The gap/seam underneath the center console is very tight so you have to move a gap opener along the gap step by step, to widen the gap. Press the thin end of one of the enclosed gap openers into the gap as shown in the picture. Press the second gap opener into the gap next to the first gap opener. Pull out the first gap opener and insert it into the gap next to the second gap opener, and continue doing this until you have one gap opener in the mid area of the console. Pull out the other gap opener. Use the enclosed alcohol pad to clean the area where the ClicOn is to be installed. Peel off the cover of adhesive tape on the ClicOn.

2. Press the gap opener into the gap in the console sidewall and press forward on the thick end of the gap opener to bend the gap wider. Insert the curved edge on the upper part of the ClicOn into the gap next to the gap opener.

3. Support the placement of the upper part of the ClicOn with you fingers and at the same time press forward on the lower part of the ClicOn with your thumb so the angled edge hooks into the gap next to the gap opener. Press until you see or hear/feel it click into place. Pull out the gap openers.

4. The ClicOn is in place.

Contains 1 x vehicle specific dash mount