ClicOn No Holes Dash Mount for Mercedes Benz GL Class 13-14

Out-of-Stock: Normal lead time: 2 weeks

$48.99 (Incl. GST) ACC-DM 604826
 

ClicOn Right Hand Mount for Mercedes Benz GL Class 13-14

This Dashmount has been custom designed to fit your vehicle's dashboard without damaging your interior. Designed for mounting ClicOn holders. ONE Part of a TWO Part Solution. Installation instructions provided.

Fits:

Mercedes Benz GL-Class 13-19
Mercedes Benz GLE-Class 16-19
Mercedes Benz M-Class/ML 12-15




This ClicOn Dash Mount allows the user to connect their cradle their dashboard without the needs for drilling holes. They are car specific. They can be used with the full range of Strike Alpha Car Cradles & Holders see http://www.strike.com.au/products/Strike-Alpha-Car-Cradles

Please read all of the instructions and look at the pictures before attaching the ClicOn.

 

1. Press the thin end of the enclosed gap opener into the seam/gap between the dashboard and the air vent panel frame, to widen the gap. Use the enclosed alcohol pad to clean the area where the ClicOn is to be installed. Peel off the adhesive tape cover on the ClicOn.  
 
2. Flip the ClicOn into an almost horizontal position (inside facing up) and press the angled edge on the lower part into the gap next to the gap opener. Pull out the gap opener.  
 
3. Flip the ClicOn upward towards the air vent. Press the gap opener into the seam/gap between the dashboard and the air vent panel frame. Press firmly forward on the upper part of the ClicOn so the grooved upper edge goes into the gap next to the gap opener. Press until you see, hear or feel the ClicOn click into place. Pull out the gap opener.  
 
4. The ClicOn is in place.

Please read all of the instructions and look at the pictures before attaching the ClicOn.

 

1. Press the thin end of the enclosed gap opener into the seam/gap between the dashboard and the air vent panel frame, to widen the gap. Use the enclosed alcohol pad to clean the area where the ClicOn is to be installed. Peel off the adhesive tape cover on the ClicOn.  
 
2. Flip the ClicOn into an almost horizontal position (inside facing up) and press the angled edge on the lower part into the gap next to the gap opener. Pull out the gap opener.  
 
3. Flip the ClicOn upward towards the air vent. Press the gap opener into the seam/gap between the dashboard and the air vent panel frame. Press firmly forward on the upper part of the ClicOn so the grooved upper edge goes into the gap next to the gap opener. Press until you see, hear or feel the ClicOn click into place. Pull out the gap opener.  
 
4. The ClicOn is in place.

Contains 1 x vehicle specific dash mount