ClicOn No Holes Dash Mount for Toyota Camry 12-14

Out-of-Stock: Normal lead time: 2 weeks

$48.99 (Incl. GST) ACC-DM 604716
 

ClicOn Right Hand Mount for Toyota Camry 12-14 Not the product you are looking for? Go to http://www.strike.com.au/products/dashmounts to start again




This ClicOn Dash Mount allows the user to connect their cradle their dashboard without the needs for drilling holes. They are car specific. They can be used with the full range of Strike Alpha Car Cradles & Holders see http://www.strike.com.au/products/Strike-Alpha-Car-Cradles

Please read all of the instructions and look at the pictures before attaching the ClicOn.

1. Use the enclosed alcohol pad to clean the area where the ClicOn is to be installed. Peel off the cover of adhesive tape on the ClicOn. Pull/flip the rubber sealant on the A-post open. Insert the angled edge on the lower part of the ClicOn into the gap and hook it behind the A-post panel edge.

2. Press firmly upwards with your right hand on the bottom part of the ClicOn and rightward on the left side of the ClicOn with your other hand. Press until you see or hear/feel the angled edge on the upper part of the ClicOn hook around the A-post panel edge by the windshield.

3 and 4. The ClicOn is in place.

Please read all of the instructions and look at the pictures before attaching the ClicOn.

1. Use the enclosed alcohol pad to clean the area where the ClicOn is to be installed. Peel off the cover of adhesive tape on the ClicOn. Pull/flip the rubber sealant on the A-post open. Insert the angled edge on the lower part of the ClicOn into the gap and hook it behind the A-post panel edge.

2. Press firmly upwards with your right hand on the bottom part of the ClicOn and rightward on the left side of the ClicOn with your other hand. Press until you see or hear/feel the angled edge on the upper part of the ClicOn hook around the A-post panel edge by the windshield.

3 and 4. The ClicOn is in place.

Contains 1 x vehicle specific dash mount