ClicOn No Holes Dash Mount for Kia Optima 11-14

Out-of-Stock: Normal lead time: 2 weeks

$48.99 (Incl. GST) ACC-DM 604642
 

ClicOn Right Hand Mount for Kia Optima 11-14

This Dashmount has been custom designed to fit your vehicle's dashboard without damaging your interior. Designed for mounting ClicOn holders. ONE Part of a TWO Part Solution. Installation instructions provided.

Fits:

Kia Optima 11-16




This ClicOn Dash Mount allows the user to connect their cradle their dashboard without the needs for drilling holes. They are car specific. They can be used with the full range of Strike Alpha Car Cradles & Holders see http://www.strike.com.au/products/Strike-Alpha-Car-Cradles

Attention! Read all instructions before attaching the ClicOn.

1. Use the enclosed alcohol pad to clean the area where the ClicOn is to be installed. Peel off the adhesive tape cover on the ClicOn. Pull/flip the rubber sealant open.

2. Insert the angled edge on the lower part of the ClicOn into the gap and hook it behind the A-post panel edge.

3. Press the thin end of the enclosed gap opener into the gap between the A-post panel and the windshield, to widen the gap. Press firmly upwards with your right hand on the bottom part of the ClicOn and rightward on the left side of the ClicOn with your other hand. Press until you see or hear/feel the angled edge on the upper part of the ClicOn hook into the gap next to the gap opener. Pull out the gap opener.

4. The ClicOn is in place.

Attention! Read all instructions before attaching the ClicOn.

1. Use the enclosed alcohol pad to clean the area where the ClicOn is to be installed. Peel off the adhesive tape cover on the ClicOn. Pull/flip the rubber sealant open.

2. Insert the angled edge on the lower part of the ClicOn into the gap and hook it behind the A-post panel edge.

3. Press the thin end of the enclosed gap opener into the gap between the A-post panel and the windshield, to widen the gap. Press firmly upwards with your right hand on the bottom part of the ClicOn and rightward on the left side of the ClicOn with your other hand. Press until you see or hear/feel the angled edge on the upper part of the ClicOn hook into the gap next to the gap opener. Pull out the gap opener.

4. The ClicOn is in place.
Contains 1 x vehicle specific dash mount