ClicOn No Holes Dash Mount for Volkswagen Multivan 03-14

Out-of-Stock: Normal lead time: 2 weeks

$48.99 (Incl. GST) ACC-DM 604433
 

ClicOn Right Hand Mount for Volkswagen Multivan 03-14

This Dashmount has been custom designed to fit your vehicle's dashboard without damaging your interior. Designed for mounting ClicOn holders. ONE Part of a TWO Part Solution. Installation instructions provided. Please Note: Only with storage below air

Fits:

Volkswagen Caravelle 10-15
Volkswagen T5 Transporter/Pickup 10-15




This ClicOn Dash Mount allows the user to connect their cradle their dashboard without the needs for drilling holes. They are car specific. They can be used with the full range of Strike Alpha Car Cradles & Holders see http://www.strike.com.au/products/Strike-Alpha-Car-Cradles
Please read all of the instructions and look at the pictures before attaching the ClicOn .

1. Use the enclosed alcohol pad to clean the area where the ClicOn is to be installed. Peel off the adhesive tape cover on the ClicOn . Press the thin end of the enclosed gap opener into the gap between the frame surrounding the air vent and the dashboard to widen the gap, and hold it in place. Press the left edge on the angled upper part of the ClicOn into the gap next to the gap opener.

2. Pull out the gap opener and press it into the gap between the frame surrounding the air vent and the dashboard (on the right side of the ClicOn ) and hold it in place. Press down on the right side of the upper part of the ClicOn so all of the angled edge goes into the gap. Pull out the gap opener.

3. Pull the ClicOn toward you and press it downward. Hook the angled edge on the lower part under the frame surrounding the air vent. Press upward on the bottom part of the ClicOn so the adhesive tape attaches.

4. The ClicOn is in place.
Please read all of the instructions and look at the pictures before attaching the ClicOn .

1. Use the enclosed alcohol pad to clean the area where the ClicOn is to be installed. Peel off the adhesive tape cover on the ClicOn . Press the thin end of the enclosed gap opener into the gap between the frame surrounding the air vent and the dashboard to widen the gap, and hold it in place. Press the left edge on the angled upper part of the ClicOn into the gap next to the gap opener.

2. Pull out the gap opener and press it into the gap between the frame surrounding the air vent and the dashboard (on the right side of the ClicOn ) and hold it in place. Press down on the right side of the upper part of the ClicOn so all of the angled edge goes into the gap. Pull out the gap opener.

3. Pull the ClicOn toward you and press it downward. Hook the angled edge on the lower part under the frame surrounding the air vent. Press upward on the bottom part of the ClicOn so the adhesive tape attaches.

4. The ClicOn is in place.
Contains 1 x vehicle specific dash mount