ClicOn No Holes Dash Mount for Hyundai i30 08-12

Out-of-Stock: Normal lead time: 2 weeks

$48.99 (Incl. GST) ACC-DM 604428
 

ClicOn Right Hand Mount for Hyundai i30 08-12

This Dashmount has been custom designed to fit your vehicle's dashboard without damaging your interior. Designed for mounting ClicOn holders. ONE Part of a TWO Part Solution. Installation instructions provided.

Fits:

Hyundai i30 08-12




This ClicOn Dash Mount allows the user to connect their cradle their dashboard without the needs for drilling holes. They are car specific. They can be used with the full range of Strike Alpha Car Cradles & Holders see http://www.strike.com.au/products/Strike-Alpha-Car-Cradles

Attention! Read all instructions before attaching the ClicOn.

1. Use the enclosed alcohol pad to clean the area where the ClicOn is to be installed. Peel off the adhesive tape covers on the ClicOn. Pull out the rubber sealent on the A-post slightly, to widen the gap. Press the angled edge on the lower part of the ClicOn into the gap and hook it around the A-post.

2. Place the enclosed gap opener onto the frame surrounding the air vent. Adjust the ClicOn position so the lower edge is placed one gap opener height over the dashboard.

3. Press the thin end of the gap opener into the gap between the A-post and the windshield, to widen the gap. Press the ClicOn upward/rightward so the upper angled edge hooks into the gap next to the gap opener. Press down on top of the ClicOn so the angled edge hooks into place properly. Pull out the gap opener.

4. The ClicOn is in place.

Attention! Read all instructions before attaching the ClicOn.

1. Use the enclosed alcohol pad to clean the area where the ClicOn is to be installed. Peel off the adhesive tape covers on the ClicOn. Pull out the rubber sealent on the A-post slightly, to widen the gap. Press the angled edge on the lower part of the ClicOn into the gap and hook it around the A-post.

2. Place the enclosed gap opener onto the frame surrounding the air vent. Adjust the ClicOn position so the lower edge is placed one gap opener height over the dashboard.

3. Press the thin end of the gap opener into the gap between the A-post and the windshield, to widen the gap. Press the ClicOn upward/rightward so the upper angled edge hooks into the gap next to the gap opener. Press down on top of the ClicOn so the angled edge hooks into place properly. Pull out the gap opener.

4. The ClicOn is in place.
Contains 1 x vehicle specific dash mount