ClicOn No Holes Dash Mount for Toyota Kluger 08-13

Out-of-Stock: Normal lead time: 2 weeks

$48.99 (Incl. GST) ACC-DM 604097
 

ClicOn Right Hand Mount for Toyota Kluger 08-13

This Dashmount has been custom designed to fit your vehicle's dashboard without damaging your interior. Designed for mounting ClicOn holders. ONE Part of a TWO Part Solution. Installation instructions provided.

Fits:

Toyota Highlander 08-13
Toyota Kluger 08-13




This ClicOn Dash Mount allows the user to connect their cradle their dashboard without the needs for drilling holes. They are car specific. They can be used with the full range of Strike Alpha Car Cradles & Holders see http://www.strike.com.au/products/Strike-Alpha-Car-Cradles

Please read all of the instructions and look at the pictures before attaching the ClicOn.

  • 1. Peel off the cover of adhesive tape on the ClicOn. Press the thin end of the enclosed gap opener into the gap between the A-post panel frame and the rubber sealant. Pull/flip the rubber sealant open. Pull out the gap opener.

  • 2. Insert the angled edge on the lower part of the ClicOn into the gap and hook it behind the A-post panel edge.

  • 3. Press the gap opener into the gap between the A-post and the windscreen, to widen the gap. Press firmly upwards with your right hand on the bottom part of the ClicOn and rightward on the left side of the ClicOn with your other hand so the angled edge hooks into the gap next to the gap opener. Pull out the gap opener and press it into the gap on the other side of the ClicOn. Press until you see or hear/feel the angled edge on the upper part of the ClicOn snap around the A-post panel edge. Pull out the gap opener.

  • 4. The ClicOn is in place.

Please read all of the instructions and look at the pictures before attaching the ClicOn.

  • 1. Peel off the cover of adhesive tape on the ClicOn. Press the thin end of the enclosed gap opener into the gap between the A-post panel frame and the rubber sealant. Pull/flip the rubber sealant open. Pull out the gap opener.

  • 2. Insert the angled edge on the lower part of the ClicOn into the gap and hook it behind the A-post panel edge.

  • 3. Press the gap opener into the gap between the A-post and the windscreen, to widen the gap. Press firmly upwards with your right hand on the bottom part of the ClicOn and rightward on the left side of the ClicOn with your other hand so the angled edge hooks into the gap next to the gap opener. Pull out the gap opener and press it into the gap on the other side of the ClicOn. Press until you see or hear/feel the angled edge on the upper part of the ClicOn snap around the A-post panel edge. Pull out the gap opener.

  • 4. The ClicOn is in place.
Contains 1 x vehicle specific dash mount