ClicOn No Holes Dash Mount for Holden Astra 04-09
This ClicOn Dash Mount allows the user to connect their cradle their dashboard without the needs for drilling holes. They are car specific. They can be used with the full range of Strike Alpha Car Cradles & Holders see http://www.strike.com.au/products/Strike-Alpha-Car-Cradles
Please read all of the instructions and look at the pictures before attaching the ClicOn mount.
ONLY FOR 5 DOOR HATCHBACK\\
- 1. Peel off the cover of the adhesive tape on the ClicOn. Hook the angled edge on the ClicOn over the panel by the windshield, but do not attach the adhesive tape yet.
- 2. Hold the enclosed gap opener upright on the dashboard and adjust the height of the ClicOn so the lower edge is aligned with the gap opener, placed one gap opener length above the dashboard.
- 3. Pull the rubber cover slightly out from the panel. Hook the angled edge on the ClicOn around the panel, under the rubber cover. Press on the ClicOn so the adhesive tape attaches.
- 4. The ClicOn is in place.
Please read all of the instructions and look at the pictures before attaching the ClicOn mount.
ONLY FOR 5 DOOR HATCHBACK\\
- 1. Peel off the cover of the adhesive tape on the ClicOn. Hook the angled edge on the ClicOn over the panel by the windshield, but do not attach the adhesive tape yet.
- 2. Hold the enclosed gap opener upright on the dashboard and adjust the height of the ClicOn so the lower edge is aligned with the gap opener, placed one gap opener length above the dashboard.
- 3. Pull the rubber cover slightly out from the panel. Hook the angled edge on the ClicOn around the panel, under the rubber cover. Press on the ClicOn so the adhesive tape attaches.
- 4. The ClicOn is in place.
Contains 1 x vehicle specific dash mount