ClicOn No Holes Dash Mount for Peugeot 207 06-14

Out-of-Stock: Normal lead time: 2 weeks

$48.99 (Incl. GST) ACC-DM 603817
 

ClicOn Right Hand Mount for Peugeot 207 06-14

This Dashmount has been custom designed to fit your vehicle's dashboard without damaging your interior. Designed for mounting ClicOn holders. ONE Part of a TWO Part Solution. Installation instructions provided.

Fits:

Peugeot 207 06-14




This ClicOn Dash Mount allows the user to connect their cradle their dashboard without the needs for drilling holes. They are car specific. They can be used with the full range of Strike Alpha Car Cradles & Holders see http://www.strike.com.au/products/Strike-Alpha-Car-Cradles

Please read all of the instructions and look at the pictures before attaching the ClicOn.

It is important to place the  ClicOn exactly in the same position as shown in the pictures.

 

1. Peel off the adhesive tape covers on the  ClicOn. Place the enclosed gap opener as shown in the picture, below the air vent aligned with the left edge of the air vent, and then place the  ClicOn directly to the right of the gap opener.

 

2. Keep the  ClicOn in that position as you press the thin end of the gap opener into the gap between the frame surrounding the air vent and the dashboard, to widen the gap directly next to the  ClicOn. Press the angled edge on the lower part of the  ClicOn into the gap next to the gap opener. Pull out the gap opener.

 

3. Press the gap opener into the gap between the frame surrounding the air vent and the dashboard. Press forwards on the upper part of the  ClicOn so the angled upper edge hooks into the gap next to the gap opener. Press downwards on top of the  ClicOn so the angled edge goes all the way into the gap. Pull out the gap opener.

 

4. The  ClicOn is in place.

Please read all of the instructions and look at the pictures before attaching the ClicOn.

It is important to place the  ClicOn exactly in the same position as shown in the pictures.

 

1. Peel off the adhesive tape covers on the  ClicOn. Place the enclosed gap opener as shown in the picture, below the air vent aligned with the left edge of the air vent, and then place the  ClicOn directly to the right of the gap opener.

 

2. Keep the  ClicOn in that position as you press the thin end of the gap opener into the gap between the frame surrounding the air vent and the dashboard, to widen the gap directly next to the  ClicOn. Press the angled edge on the lower part of the  ClicOn into the gap next to the gap opener. Pull out the gap opener.

 

3. Press the gap opener into the gap between the frame surrounding the air vent and the dashboard. Press forwards on the upper part of the  ClicOn so the angled upper edge hooks into the gap next to the gap opener. Press downwards on top of the  ClicOn so the angled edge goes all the way into the gap. Pull out the gap opener.

 

4. The  ClicOn is in place.

Contains 1 x vehicle specific dash mount